Redarc Dual Battery Kit inc Battery Tray & Century AGM Battery Tub Mount (Nissan NP300 Navara 2015-2020)

Our Dual Battery System includes the following

1 x Battery Tray for 2^nd Battery

1 x BCDC Charger (25amp)

1 x Century AGM Battery (65AH-105AH)

1 x Redarc FK40 or FK60 Fuse Kit (Dependable on BCDC Charger Selected)

****All Cabling, Terminals and connections (Only supplied when selecting installation)****

REDARC BCDC Specs

Proven and Tested

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.  

Features

•                    Separate DC and solar charging inputs
•                    Maximises the performance and life of your auxiliary battery
•                    Simultaneous DC and solar charging with Green Power Priority
•                    Suits 12V/24V standard and variable voltage/smart alternators
•                    Suitable for AGM, GEL, standard lead acid, calcium and LiFeP0₄ batteries

FK40 & FK60 Specs

One of the most common failures the REDARC technical support team hear about with dual battery installations is a failure of the fuse/holder. This failure can result in the fuse and holder melting causing the connection to be lost and, therefore, no charging of your auxiliary battery. This situation is usually diagnosed as a blown fuse however it is more likely attributed to a poor quality fuse holder.

Poor quality fuse holders often don’t make adequate contact with the fuse which can allow dirt and dust to get in between the contact points. This causes excess heat to be generated due to the high resistance. This excess heat can be enough to melt the fuse and the holder. Even if the fuse holder doesn’t melt, you could be losing valuable charge to heat dissipation.

REDARC fuse kits use only the best quality fuses and fuse holders designed to fit the cable required for the specified current and make a solid connection, giving you peace of mind that your installation is working efficiently and safely.
REDARC offers fuse kits in 40A and 60A versions designed for BCDC installations and a 100A version designed for SBI installations.

Kit Includes:

•          2 X Fuse Holders
•          4 X 60A Fuses
•          Cable Crimps
•          Detailed instruction sheet